Skip to main content
Telephone contact

Sales

+49 2541 84841-200

Sales international:

+49 2541 84841-300

Technical support:

+49 2541 84841-428

Purchase:

+49 2541 84841-400

CleanMaster Pro 30

Central suction- and filtering device "CleanMaster Maxi". This unit is especially suited for the use at laser devices.

The first filter step is a bag filter. Then a large pre-filter of the filtering category M5 departs the rough particles. Subsequently the air will be lead through the high efficiency submicron particulate air-filter H13 (separting degree of 99,95%) where the last fine smokes and particles will be separated.

As an end-filter this device is equipped with an active carbon filter-cassette for the adsorption of gases and smells.
The cleaned air go back to the room over the silencer housing.

The housing is made of stable steel-sheet and is inside and even outside powder coated. As a standard solution there is a filter sealing equipment build in which takes care for the absolutely tightness.

An automatic control shows when a filter change is necessary.
Self-evident, the device is delivered ready for plug-in and is also equipped with 5,0 m cable.

Properties

Intake manifold (mm): NW 250
Volumetric flow (m³/h): 3.000
max. pressure (Pa): 2.800
Engine power (kW): 3
Supply voltage (V): 400
Connection frequency (Hz): 50
Current consumption (A): 6,6
Pre-filter: Taschenfilter G4
Vorfilter: Taschenfilter ISO 16890 ePM10 coarse > 60 % (G4)
Vorfilter 2: ISO 16890 ePM10 > 50 % (F5)
main filter: H13
Filter class: Schwebstofffilter H13
Hauptfilter Anzahl: 1
final filter: Aktivkohlefilter (ca. 14 kg Schüttung)
Separation efficiency (%): 99,95
Sound level (dB(A)): 65
Weight (kg): 260
Width (mm): 665
Depth (mm): 1.010
Height (mm): 1.650