CleanMaster Basic 22
Delivery time on request
- Three-stage filtration, HEPA H13
- Activated carbon for gases, odours
- More suction power than Basic 15
CleanMaster Basic 22
The TEKA CleanMaster Basic 22 is an extraction system for laser fumes and soldering fumes with high air demand. It is used as a mobile or stationary unit, mainly on laser marking systems, at several manual soldering workstations and on soldering systems. The CleanMaster Basic 22 offers more suction power than the Basic 15.
At a glance
- Three-stage filtration: M5 pre-filter, HEPA H13 main filter, activated carbon
- Fan: high negative pressure, even with loaded filters
- Connection: spigot for suction hose or pipework
- Housing: sheet steel, fully powder-coated
Your benefits
- For laser fumes and odours: The activated carbon filter as the final stage absorbs gases and odours produced during laser processing and soldering.
- Thorough filtration: A large-area pre-filter retains coarser particles before the HEPA H13 filter separates the fine fumes and dust.
- Consistent performance: The fan with high negative pressure delivers a high air volume even when the filters are loaded. This allows good filter service life.
- Tight filter seating: A built-in filter lifting device ensures that the filters are seated tightly.
- Safe operation: The automatic filter monitoring shows when a change is due. A phase sequence indicator in the connection cable warns of incorrect fan rotation.
Applications
Laser marking and laser engraving, several manual soldering workstations, soldering systems with high air demand.
The operating instructions are available in the Downloads tab. Our overview page shows more systems for laser fume extraction.
Properties
| Main filter quantity: | 1 |
|---|---|
| Volumetric flow (m³/h): | 2.000 |
| max. pressure (Pa): | 2,800 |
| Engine power (kW): | 2.2 |
| Supply voltage (V): | 400 |
| Connection frequency (Hz): | 50 |
| Current consumption (A): | 5 |
| Vorfilter: | ISO 16890 ePM10 > 50% (F5) |
| main filter: | Filter cartridge |
| Filter class: | DIN EN 1822 - H13 |
| final filter: | Activated carbon cartridge: 14 kg |
| Separation efficiency (%): | > 99.95 |
| Ansaugstutzen (mm): | NW 200 |
| Sound level (dB(A)): | 68 – in accordance with DIN EN ISO 3744 |
| Weight (kg): | 200 |
| Width (mm): | 665 |
| Depth (mm): | 1,010 |
| Height (mm): | 1,280 |
Questions about this product?
Just drop us a line about what you need – we'll get back to you and figure out together what fits your application.