Raumlufttechnische Lösungen
Raumlufttechnische Lösungen sorgen in Hallen für saubere Luft und filtern Schadstoffe sowie Rauch und Staub, der beispielsweise von punktuellen Absauganlagen nicht erfasst worden sind.
Gleichzeitig unterstützen sie beim Energiesparen, da durch Wärmerückführung Heizkosten effektiv gesenkt werden können.
Je nach Anwendungsbedarf und Hallengröße gibt es unterschiedliche raumlufttechnische Lösungen. Die Produktpalette reicht dabei von Standalone-Filtertürmen bis hin zu ganzen Systemen mit Rohrleitungen.
CleanAirCube
The CleanAirCube can be ideally used in industrial and logistics halls.Set up, plug in, produce clean air: That's how simple the standalone room air conditioning solution works.
Little energy, big effect: with just over half a kilowatt of power, the filter tower cleans up to 8000 m³/h of air.
CleanAirCube: The perfect complement for clean air at the workplace
Max. volumetric flow of the fan | 8.000 m³/h |
Motor performance | 550 W |
Voltage | 230 V/50 Hz |
Separation efficiency | > 99% |
Current consumption | 4 A |
Noise level | 65 dB(A) |
Dimensions (W x D x H) | 865 x 682 x 2.778 mm |
AirTech P10
The AirTech P10 is the solution for clean hall air.Specially developed for industrial operations: Cleans where no point extraction can be implemented or as an additional room air solution.
Intelligent air routing: air containing pollutants is captured via lateral intake ducts, filtered and then returned to the work area via jet nozzles.
Compact room air solution: Compared to push-pull and similar systems, as little floor space is required and no additional ductwork is needed
Effective heating cost savings: Heat recirculation ensures warm halls even in winter without additional heating.
State-of-the-art filter technology: Long filter service life thanks to high-quality filter material, large filter area and automatic on-demand cleaning IFA-W3 certified: Guaranteed separation of over 99% of pollutants.
Max. volumetric flow of the fan | 10.000 m³/h |
Motor performance | 11,0 kW |
Separation efficiency | ≥ 99 % |
Dimensions | 800 x 1200 x 3990 mm |
AirTech
The AirTech is the perfect addition for operations where point extraction is not enough. Effectively save heating costs: Heat recirculation ensures that the expensively heated hall air can also remain in the hall.State-of-the-art filter technology: Long filter service life thanks to high-quality filter material, large filter area and automatic cleaning as needed.
Different sizes for every need: Depending on the volume of smoke and the size of the hall, high air exchange rates can also be achieved.
Now minimize the pollutant load in the hall air with AirTech concepts and ensure clean hall air. IFA-W3 certified: Guaranteed separation of over 99% of pollutants.
Max. volumetric flow of the fan | 18.000-30.000 m³/h |
Motor performance | 11,0-22,0 kW |
Separation efficiency | ≥ 99 % |
Filter surface | 324 - 432 m² |
Blowtec
BlowTec is the room air conditioning solution that adapts to the conditions of the installation situation.Individual through modular design: The system finds its place in any hall and ensures maximum air purity.
The perfect complement to point extraction: Permanent recirculation of clean air provides a noticeable improvement of the hall air.
Effectively save heating costs: Heat recirculation ensures warm halls even in winter without additional heating.
From the pipe into the plant back into the hall: Project-specific piping is designed individually to suit the situation on site
State-of-the-art filter technology: Long filter service life thanks to high-quality filter material, large filter area and automatic cleaning as required.
Individual and suitable for every hall - enquire now about BlowTec for your personal room air solution.
Max. volumetric flow of the fan | 7.500-10.000 m³/h |
Motor performance | 7,5-11,0 kW |
Separation efficiency | ≥ 99 % |
Filter surface | 100 m² |
PushPull
The PushPull room air handling solution is the perfect addition for companies where point extraction is not sufficient.Cleaning through smart airflow: Contaminated air is drawn in on one side and returned cleaned on the opposite side.
Continuous collection of pollutants: The room climate is sustainably improved by the continuous and even air flow.
The perfect complement to point extraction: Permanent recirculation of clean air provides a noticeable improvement in the hall air.
Effectively save heating costs: Heat recirculation ensures warm halls even in winter without additional heating.
From the pipe into the plant back into the hall: Project-specific piping is designed individually to suit the situation on site
State-of-the-art filter technology: Long filter service life thanks to high-quality filter material, large filter area, and automatic cleaning as needed.
The PushPull room air handling solution is the perfect complement for businesses where point extraction is not enough.
Max. volumetric fl ow of the fan | 7.500 - 10.000 m³/h |
Motor performance | 7,5 - 11,0 kW |
Separation efficiency | ≥ 99 % |
Wir beraten Sie gerne!
TEKA Absaug- und Entsorgungstechnologie GmbH
Millenkamp 9
48653 Coesfeld
Deutschland
Telefon: +49(0)2541-84841-0
Technischer Support: +49(0)2541-84841-428
Fax: +49(0)2541-84841-72
E-Mail: info@teka.eu
Contact