CareMaster wall
with 1 Air-inlet spigot diam.250mm
Delivery time on request
- Wall unit, one large intake spigot
- For up to two workstations
- Filter monitoring, hours counter
CareMaster wall
with 1 Air-inlet spigot diam.250mm
EAN: 4251906207543
In this version of the TEKA CareMaster Wand, one intake spigot with a larger nominal diameter carries the extracted air from up to two welding workstations to the filter unit. A large-area pre-filter and a particle filter clean the extracted air.
At a glance
- Connection: one intake spigot with a larger nominal diameter for duct or hose
- Wall mounting: filter unit on the wall, keeping the floor clear
- Two-stage filtration: large-area pre-filter and particle filter for fine fumes and dust
- Fan with high negative pressure: high airflow even as the filter load increases
Your benefits
- Tightly sealed filters: The sealing lift device presses the particle filter firmly into place, so no air bypasses the filter.
- Constant extraction performance: The powerful fan keeps the airflow high even as the filters fill up. This ensures good filter service life.
- Change when needed: The filter monitoring shows when a change is due, and an operating hours counter is standard.
- Robust design: The sheet steel housing is fully powder-coated and designed for tough operating conditions.
Applications
Welding workstations with unalloyed metals and thermal cutting of metals. For high-alloy steels, we recommend systems with IFA W3 certification, such as the CartMaster IFA Wand.
Standard equipment
Large-area pre-filter mat, particle filter, sealing lift device, visual filter monitoring, operating hours counter, external control with connection cable and wall bracket, plus one intake spigot with a larger nominal diameter.
Options
Start-stop automatic, switching on and off via the extraction hood, lighting kit, aluminium mesh pre-filter, activated carbon filter insert and exhaust air spigot.
The operating instructions are available in the Downloads tab. Our overview page shows more systems for welding fume extraction.
Properties
| Volumetric flow (m³/h): | 3.500 |
|---|---|
| max. pressure (Pa): | 2,500 |
| Engine power (kW): | 2.2 |
| Supply voltage (V): | 400 |
| Connection frequency (Hz): | 50 |
| Automatic cleaning: | No |
| Width (mm): | 665 |
| Depth (mm): | 681 |
| Height (mm): | 940 |
| Colour: | RAL 7016 |
Replacement parts
Accessories
size.: 610 x 610 x 186 mm+ (6 mm sealing (x2))
into the exhaust hood diam. 150/200
with 32A CEE and Schuko Power socket
shut-off damper 24VDC/230VAC
Questions about this product?
Just drop us a line about what you need – we'll get back to you and figure out together what fits your application.